86-010-87275391
2-2003, No. 6 Bldg., East Of South Third Ring Rd., Fengtai District, Beijing, China (Mainland)
PAN hollow fiber UF membrane: Inside-out filtration design, natural hydrophilic, low trans-membrane pressure, large permeate flux, easy to clean; Good performance of resistance to chloride and solvent, dry membrane made by unique technology, easy for storage, transportation and maintenance; Material cost is lower, widely applied to surface water and non - polluted water treatment;nside-out filtration design, natural hydrophilic, low trans-membrane pressure, large permeate flux, easy to clean; Good performance of resistance to chloride and solvent, dry membrane made by unique technology, easy for storage, transportation and maintenance; Material cost is lower, widely applied to surface water and non - polluted water treatment;
PS (PES) hollow fiber UF membrane: Inside-out filtration design, the hydrophilic modification, uniform pore size distribution, with a wide range of MWCO & pore size for options, high flow and pollution resistance, high temperature resistance (<95°C), good hardness and high strength, acid & alkali resistant, high health & safety, biocompatibility, can be used in food service industry & pharmaceuticals industry for purification, separation and concentration;
PP hollow fiber UF membrane: Outside-in filtration design, the hydrophilic modification, food grade raw material, extremely strong tensile strength, high pressure resistance, fiber not easy to break up; Extremely slim hollow fiber and outside-in filtration design, more large membrane area, large permeate flux, high dirt holding ability, acid & alkali resistant, anti-pollution, material cost is lower, widely applied to pretreatment of RO system, beverage purification & concentration, waste water treatment, electrophoresis paint recovery;
PVDF hollow fiber UF membrane: Outside-in filtration design, the hydrophilic modification, pollution resistance, perfect antioxidation & antibiosis performance, unique outer cortex & spongy micro-structure, extreme low pressure application, high tenacity, food grade raw material, extremely strong tensile strength, mainly applied in municipal sewage treatment, industrial waste water treatment, reclaimed water reuse
UF MODULE 6040
Ultrafiltration Components Parameters
Model No. | PAN | PS | PP | PVDF |
Size | Φ160x1352mm | Φ160x1352mm | Φ160x1352mm | Φ160x1352mm |
Hollow fiber material | PAN | PS | PP | PVDF |
Hollow fiber ID/OD | 1.0mm / 1.6mm | 1.0mm / 1.6mm | 0.4mm / 0.5mm | 0.7mm / 1.3mm |
MWCO (Daltons) | 50k~100k | 10k~100k | 50k~100k | 100k~200k |
Membrane area | 15m2 | 15m2 | 29m2 | 23m2 |
Filtration method | Inside-out | Outside-in | ||
Initial flux L/H, 0.1mpa, 25 °C pure water as feed | >4500 | >4500 | >5000 | >4900 |
Designed water flux | 40-120L/m2/h | 40-80L/m2/h | ||
End seal material | Epoxy resins | |||
Housing material | UPVC | |||
Connection/Pipe | Union connection / PVC Pipe OD. 40mm | |||
Max. Feed pressure | 0.3mpa | 0.3mpa | 0.3mpa | 0.25mpa |
Max. trans-membrane pressure | 0.2mpa | 0.2mpa | 0.2mpa | 0.15mpa |
Normal trans-membrane pressure | 0.02-0.15mpa | 0.02-0.15mpa | 0.02-0.15mpa | 0.01-0.1mpa |
Feed turbidity | <50ntu | |||
Permeate turbidity | <0.1ntu | |||
Max. working temperature | 5-45°C | |||
PH range | 3-9 | 2-12 | 1-14 | 2-13 |
Microorganism, pathogen | 99.99% Removal | |||
China Frotec Environmental Co.,Ltd. We are one of the leading professional manufacturers of filtration products in China. With advanced production equipment, quality control instruments and technology. Frotec designs and manufactures filtration products in liquid and gas & airline, such as filter cartridge, filter housing, membrane pressure vessel, FRP tank, UF membrane, etc.
Our products are applied to bio-pharmaceutical, medical, food & beverage, chemistry, electronics, water treatment and laboratory application.
With many years’ experience in filtration, all of Frotec products meet the national standard. Our products are best sold in many countries and areas, like USA, UK, Africa, Europe, Southeast Asia, etc.
We aim at working together with our partners to protect our environment. We will continue to carry forward the quality-first pioneering and innovative spirit to manufacture and supply products with superior quality and reliability at competitive price.
We will attend several main Aqua Exhibitions all over the world.
About shipping
By Express, Air, Boat are available.
1,OEM service available ?
Yes, OEM service is available, but brand price better than OEM
2.Payment Term
We can accept L/C, T/T, Western Union, Money Gram
3.What about delivery time?
If we have stocks of the item you need, we can send goods to you within 3 working days after deposit or 100% payment into our bank account.
4.Shipping :
If your order is not big enough , Door to Door Service is the best choice via UPS,FEDEX,DHL,EMS.
For big quantity, by air or by sea through your forwarder is one Normal Way , we also can provide cost-effective forwarder for your reference.
5. Lead time:
The normal lead time for PP filter cartridge is 5-10days, which depends on your quantity.
6.Do you accept sample order?
Yes,we can make your customized sample before mass order placed
Hi, if you wanna know more information, send me inquiry or e-mail, we will reply you within 24 hours.
Contacts
